Check out the new projects site for A-i-S

Thursday, May 17, 2012


Updated uBoot commands, no longer 'mmcinit'

If using Ubuntu ARM 12.04 with a BeagleBoard C3 that has a recent uBoot version on it then
the following suggested command will not work:
setenv bootcmd 'mmc init;fatload mmc 0 0x82000000 boot.scr;source 0x82000000';
  setenv autostart yes; saveenv; boot
Instead you need to convert the "init" to "dev 0", so that it is:

setenv bootcmd 'mmc dev 0;fatload mmc 0 0x82000000 boot.scr;source 0x82000000'; 
  setenv autostart yes; saveenv; boot
This is the new way to set the mmc device.